Best Work Boots Review: Strength, Protection and Comfort
When working in an environment where risks and dangers surround you, a little more precaution is important for you. This calls for a sturdier pair of boots or footwear. For instance, think of an industry where chemicals and hazardous material will lay on the floor or are likely to spill or over all the time. Or again being in a construction site where pieces of steel wires and nails will be lying around dangerously, protective and strong pair of boots will be much needed on top of being comfortable and enhance efficiency.
No matter the reason that you may have to purchase boots for the workplace, your experience at work will never be the same for one reason- We are about to lay before you all the facts and reasons that you need to consider when getting a new pair of boots. This review will highlight the reasons as to why boots are important at workplace, selection of the perfect pair for your workplace and just the right pair that after hours of research proved to be the best, for each man or woman, purposing to shine at their workplace.
We’ll get into this business immediately:
Choosing the best work boots: The Decisive Buying Guide
We can all agree that most sports shoes are designed without a particular sport in mind which is uncommon for boots- different workplaces demand that you carefully select a pair that will match with the work setting. You could be working in an area where you have high temperatures. Imagine selecting boots that are not strong enough and ending up cooking your toes and heals due to wrong selection of the boots! That’s disaster that no one would wish to be part of in any single day
All your fears on all the risks are in our hands after deep research and examination of various boots. At the outset, we will tell you of the things that you will need to consider before pushing the trolley on your way to getting a pair of boots to take to work. We shall present the general considerations that you may reflect on before identifying the perfect fit for your workplace.
Reasons for Work Boots
Work boots are made for one main reason- to keep your toes safe and intact when you’re working. However, other advantages exist as to why boots are important when you have a perfect pair, as we will explore below:-
Our health happens to determine our productivity in our workplaces. Imagine having painful feet- the level of discomfort would not allow you be productive. Having healthy feet and body guarantees happiness and better output during and even past working hours.
Relieve Straining and Maintain Body Balance
All the bodyweight and loads you may be carrying at your work area all rests on your feet. Having all this weight may be worsened by having terrible boots on your feet which would lead to fatigue, straining and stress on your feet. Additionally, you may want to maintain your body in perfect balance to ensure that your joints don’t experience pain. Proper work boots will guarantee great support, ideal balance and less strain improving your output at the workplace.
Being a workman means that you are most likely going to be through hardships and extra pain from work boots might be a pain in the arm you may not want to go through. Its common sense and acceptable norm that every worker wants to be cozy in their working gear. Always consider having work boots with a thick warm tongue, synthetic upper and a padded collar. And to those of us who spend extended hours at workplace- having a comfortable boot means that you will remain productive and end up enjoying the time you spend at work.
For comfy boots tips, always select cushioned internal that will not only offer great support to your heels and ankles but also keep your feet warm even in harsh conditions. Modern technology has seen the introduction of anti-fatigue features that will keep the feet relaxed and productive throughout the day. And when smelly feet are an issue, go for those boots that have an anti-microbial element behind a mesh lining that will not make those around you run once you take off your shoes!
Rubber soles are known to offer great cushioning to the heels of the feet, and they are always recommended. They reflect the energy and shock emanating from those long days you spend on your feet will be absorbed and redirected elsewhere, ensuring that you remain energetic all day long.
Reduce chances of getting injured
Blisters or any type of work injuries are our everyday fears whenever we enter our places of work. Most work boots anticipate these fears and are designed to prevent such. Selecting a work boot that has traits which tend to anticipate injuries and reducing these risks immensely should be considered before purchasing a work boot.
Weight of the Shoe
Previously, most companies used to make work boots with steel materials. However, and considering the weight factor, amalgamated materials have come to replace steel, which is relatively lighter. This new multiple-material design should maintain same level of protection and keep the weight lower than the traditional steel made boots. Similarly, arguments have been fronted on the basis that work boots with steel may be quite dangerous especially in areas where water and electricity are involved, notwithstanding the solid protection it might be giving you.
Considering that a rubber sole will greatly reduce the amount of weight that you may have to carry around, always consider it. In addition, rubber soles on muddy, long-distance treks will prove a task that needs your fair assessment before settling on the type of boot you wish to purchase.
Categories of safety toes
One of the basic forms of human nature is expecting risks but knowing how to effectively avoid them or mitigate the impact they may have. Expecting accidents and effectively reducing the way they impact a work boot user happens to be very important and can be said to adversely save many workmen and workwomen injuries. Manufacturers have developed three categories of safety toes explained below;
- Aluminium toes
Strength, durability and lightweight is what these work boots bring to the table, making them top of the list of safety toes boots. A combination of Aluminum and Titanium are used to make this boot that will ensure your feet are safe from any type of danger. A slim profile takes care of those of us with broad feet and will not pinch our feet once we wear these boots. However, if your work environment is one where extreme temperatures, be they too hot or very cold are the norm, these boots are not advised as they are known to conduct temperatures extremely well.
- Steel toes:
Steel happens to be among the strongest metals in the earth today. Having steel toes guarantees coverage of all the toes, and it’s the reason the manufacturers have preferred it over time to make steel toes. Dangers involving hitting hard places, dropping of sharp objects on your feet or even heavy objects on your toes have always been taken care of by steel toe work boots. It will not surprise you to note that the boots have been designed perfectly to keep you away from the risk of electric shock, something that has made more companies insist that all workers must have when working on the ground.
- Composite toes:
Manufacturers tend to see how different combinations will improve the lives of humankind to the fullest. Steel and aluminium toes tend to be in one way be heavy, terrible heat conductors or even both. With the composite toes, alternatives like Kevlar, plastic and carbon fibre are combined to produce heat and cold friendly boot which fits perfectly, protects your feet and remains relatively light.
The market of work boots has gradually grown over the years to develop some of the handiest boots for workers even in the harshest environments. These companies have not only dedicated resources and time to make creative and recognizable brands. These brands can be said to be perfect, and it would be important if you could consider the following when selecting the best work boot;
We all respect this brand for one main reason- they have been able to curve their name on quality and performance with their products. This work boot has built a reputation in the market over time and is known for the high standards they have. However, these boots are known to have a terrible break-in, but once you pass that stage, the experience with work boots becomes a whole new experience.
Having been in the market for a long period, we can all agree that this product is among the top. The experience in making these boots guarantees quality and first-class performance at your workplace. Take for example, the Men’s Timberland 27068 which has been around for longer, and you will enjoy perfection.
- Red Wing
When one talks of over 70 years designing boots, you will definitely agree that that is guaranteed quality and performance. These boots are elegant and classy, although they are deemed quite pricey.
In this modern era, designing products and incorporating technology happens to produce among the best inventions for modern-day workers. Wolverine, with over 100 years making boots stands for durability and excellence. To incorporate modern technology, they have manufactured the Edge LX Nano Toe which is not only trendy but also keeps your toes safe from unexpected accidents at workplace.
A perfect work boot ought to last long and resist most workplace adversities it’s exposed to. Practically, a good work boot should be able to be used for about a year. To ensure that a shoe will serve you for long, always check quality, and insist on proper stitching and well-glued sole and the top without gaps that may let water in the shoe. The shoe, being a workman’s shoe, should at least be able to handle most harsh work environments and being worn daily without compromising its life span. Always go for a work boot that is made of treated leather, rubber sole and polyurethane to ensure that it’s resilient enough and free from wear and tear over time.
The environment that you may be working in might be affected by the type of footwear you wear. Think of working on a concrete floor or flooring, where the final job is seen physically- you may not want to damage it after. In such instances, go for boots that are flat or have minimum treading. Think of work boots with a wedge as they will be easy to clean. Tight-fitting, properly laced and comfortable work boots will be the most efficient for these environments.
From time immemorial, rubber sole, synthetic welt and leather top have been considered the perfect materials to produce work boots. The welt is the strip belt that separates the lower and upper sole and joins them to give that perfect finish for your shoe. Additionally, manufacturers tend to make the boot’s welt with a rugged design that ensures toughness and durability.
It’s also a common production style where the upper part is directly attached to the outer sole. Here, molten rubber is kept hot until the upper part of the shoe, hardens and forms the outer sole when it eventually cools. The best part of this boot is that it remains lightweight, comfort and will gently absorb all shocks from your movements with ease.
Manufacturers know that extreme harsh conditions call for stronger work boots and therefore developed the cement design. The strong and flexible adhesive is used to join the bond with the rest of the boot. This design is credited as being relatively cheap and easy compared to the others explained above, and the levels of comfort you will enjoy with these work boots are unfathomable.
Insulation and Waterproofing
Most workplaces demand that work boots be waterproof, but we all know that getting that a perfect boot that will keep water out is quite a task. Always select shoes that the manufacturer has recommended for snowy environments and waterlogged areas. Properly insulated boots will keep your feet dry and avoiding all sogginess and soaked feet.
During winter, look for work boots that have been well insulated and can handle extremely low temperatures without causing discomfort. It is further recommended that you need to be careful when choosing the perfect insulation, not to be excess and make the boots unusable during hot and summer season.
Some boots are made for some special activities that you may have to undertake. For instance, if you work as a rail man or you’re a logger, you may need boots that offer extra support or even have metal guards to avoid severe injuries. Some companies have also made work boots that have ankle and calf support as special protection for the employees exposed to specific dangers. Consider boots that have a height of 9 inches in height for some of these features.
Traction and Sole Design
Movements around the working area for a workman demand that you be careful as you move around. Areas that are wet and have sharp objects lying around need boots that are resistant to punctures and retain good traction. Additionally, acidic substances like acids and corrosive liquids need a boot that will not be affected and further reach your skin. For workspaces that involve climbing, think of the heel and let it be about ¾ inches high with a bevel set at 45 degrees.
You may imagine getting a boot that has a strong sole and is tough on the outer. However, you may find that breaking the shoe might be quite a job, which you may not enjoy when working. When the shoe is for immediate use, let the break-in period determine the type of work boot you choose before a purchase.
Of all the things that we can control, weather happens not to be one of them. However, you may not be able to control the weather, but you could keep your body warm by having the right gear. Think of having boots that are well insulated and will not allow cold and water get to your toes. For snowy weather, consider boots that are rough and tough with impeccable grip capability.
Imagine boots that are too tight for your feet, and you are to spend the whole day in them. That sounds like a very long and uncomfortable day, where you may even end up sustaining injuries on your feet. Further to being very tight, the work boots may have terrible angles that may result in unnecessary injuries so having a little more space in the boot may be important.
The ability of a work boot to allow free air movement not only keeps your feet safe from injuries but also keeps the toes and feet dry, avoiding sweaty feet that would otherwise stink. Consider a work boot that has a hole and a spongy internal to absorb sweat from the feet due to extreme temperatures. Extreme temperatures may need a work boot that resists heat, which may accumulate in the shoe and cause certain diseases associated with moisture on your toes.
Best Work Boots
- Caterpillar Men’s Second Shift Steel Toe Work Boot
The Caterpillar Men’s Second Shift Steel Toe Work Boot is a shoe that every worker should be having due to its tolerance. With its many years in the market designing and manufacturing shoes, Caterpillar continues to consolidate its position in the world with this workman boot. Made of combined rugged, tough and rough material, this boot will perform in just any environment and condition.
With a rubber sole, the traction and resistance from the slip cannot be matched and will make working on rainy weather, slippery surfaces or even oily and greasy environments. Terrible odors and smelly feet have been snuff out with this boot- the mesh nylon linings keep moisture out of the shoe and maintain dry fresh feet.
Caterpillar boot makers know that comfort at workplace is central. To ensure that your days at work remain pleasant, a retractable sock lining and a posh soft collar give the boot a perfect finish. Steel has been featured in this boot twofold-steel toe reinforced with strong durable leather and secondly on the shank ensuring further support and stability.
- Durable and very flexible
- Perfect traction
- Water and Oil resistant
- Eliminates smelly feet problems
- Steel on shank and toes offers additional protection
- The shoe is quite heavy to move in with
- Timberland Pro Men’s Pitboss 6” Steel Toe
Established in 1973, Timberland remains one of the most serious work boots that are in the market. A top-ranking bestseller for work boots on Amazon, Timberland boots are specifically designed for efficient workers who love and desire to deliver perfection at work. The Timberland Pro Men’s Pitboss 6” Steel Toe is fundamentally a safety shoe. This shoe keeps hazards and dangers from electric shock and heats away, from the Cambrelle fabric and a rubber lining that keeps electric shocks and extreme heat away. With a steel toe fitting, the boot guarantees safety for your toes and feet.
The Pitboss 6” features nubuck leather on the top and a polyurethane midsole which is waterproof. A nylon dispersion plate is specifically designed to handle rough and hard surfaces at work as it will absorb and redistribute all shock waves. The ANSI safety standards are well maintained with this work boot. The company recommends this boot to electricians and those working in extremely hot environments.
Worried that your feet will smell after a long day at work? Worry no more. The work boot comes with anti-microbial treated to ensure that your feet do not smell and lets you remain confident all through. Let the Timberland Pro Men’s Pitboss 6” handle all your comfort and safety, with a service that will run for many days!
- Comfy design that keeps fatigued of your feet and body in general
- Durable and comfortable
- Enhanced safety with a steel toe cap
- Heat and electric shockproof
- Keeps stenches and foul smell with the interior lining design
- ANSI safety standards compliant
- Not the most recommended for wet places as its prone to water entering the boot.
- Caterpillar Men’s Diagnostic Steel Toe Waterproof Boot
Caterpillar’s expertise and experience have made them feature twice on our list of best work boots. Caterpillar Men’s Diagnostic Steel Toe Waterproof has earned this spot and for good measure- safety, comfort and the material used to make this work boot. On the outset, the insulation material used to make this boot keeps you warm and will have zero impact on tough surfaces when trailing.
Walking on steep and rough terrains with this boot will never be the same again- the sole offers an extra-strong grip that is perfect for any terrain. The sole has also been firmly attached to the top part and will definitely last for many years without coming off, assuring you of durability and long service.
Insulation of this boot is one to reckon with. With 200g of insulation and firm foam, this shoe can be worn on just any weather. Additionally, a waterproof cover made of leather makes this shoe’s performance on snow incomparable.
- Guaranteed comfort
- Steel toe for your safety
- Great traction guaranteed by a rubber sole
- Amazing insulation for warmth
- Steel is protected from scratches by tough leather
- You must size down for comfort fitting
- KEEN Utility Men’s Atlanta Cool Steel Toe Work Shoe
The keen utility has mastered the craft of making work boots for various needs. The Atlanta Cool Steel Toe Work Shoe is particularly made for the hot weather. The work boot features upper parts that have been perfectly aerated to ensure that moisture and sweat from the feet are not a bother as you go on with your errand on hot seasons. The 1.25 inches keeps the work boot low for firm grounding and stability.
The KEEN Utility Men’s Atlanta Cool Steel Toe Workboot is a quality boot crafted to the last detail- the non-skid sole and uneven steel toe are designed to protect your toes all the time. A double density EVA midsole and a detachable double density footbed are all part of the manufacturer’s effort to ensure that your comfort is not compromised
- The rubber sole is slip-resistant
- Mesh lining for perfect aeration
- The steel toe guarantees extra toe protection
- Sleek new design
- The arch has minimum support
- Wolverine Men’s W02421 Raider Boot
When a manufacturer has been in the industry designing and making boots for over 130 years, then you know they mean business. Wolverine was established in 1883 and had since then been mastering the art of giving us the best boots. The Wolverine Men’s W02421 Raider Boot was made focusing on two key components- quality and performance. The makers of the shoe use the highest quality leather coupled with mesh linings that protects you from all strong elements like chemicals and oil products.
The shoe’s weight of 2.5Kgs is one that not only makes a statement about how Wolverine is serious about your safety but also guarantees performance in harsh environments, rugged terrains and will serve you for a long time. With this boot, you don’t have to worry about scratches as its high-quality material resists abrasion like never before.
With gentle padded collars, comfort of your feet is guaranteed and will not exhaust you as go about your business. The versatility of the boot lets you work indoors and outdoors in all types of weather conditions.
- Easy to lace to your desired comfort
- Oil and waterproof
- Sturdy leather guarantees durability
- Pads to absorb shock minimizing fatigue on your feet
- Perfectly aerated to keep the foul smell away
- Quite heavy
- The lace hooks tend to wear out with time
- Thorogood Men’s American Heritage 6″ Moc Toe,
We all tend to believe in companies that have built their brand over time, and for one good reason- they have mastered the art and perfected it. Thorogood was started in 1964 and has been on the forefront towards customer satisfaction. The best work boot to ever be designed by Thorogood is the Men’s American Heritage 6″ Moc Toe, which also happens to be most popular among their work boots. This boot features deadly coloured leather, brown in colour, stitched to perfection for the toughest working conditions. For your safety, the steel toe cap is perfectly incorporated to protect the delicate parts of the feet.
This boot is perfect for both industrial and hiking adventures; the perfect traction is key to all the movements you may have around whether in the indoors or out there in the wild. The lacing of the boot is specifically designed to fit well as per your comfort, while the ankle support is designed to make sure that your ankles are neither strained nor exposed to any form of danger as you work your way around. Do you spend more hours at work? This boot has removable inner soles and interior made of very comfy velvet.
- Multipurpose boot usable in different environments
- Comfy, stylish and durable.
- Electric resistant
- Supports additional body weight
- Seems smaller than ordinary standard measurements
- Red Wing Heritage Men’s Classic Moc 6″ Boot
The Heritage Men’s Classic Moc 6″ Boots are the true definition of toughness in modern-day. Designed for battle during World War 1 and 11, the shoe speaks for itself as being hard-hitting and reliable. The sole and the heel are lined with a thick sole that offers excellent support. The design of the sole guarantees performance on concrete floor, hard ground and rugged terrain.
The all-round triple stitching is made in a way that makes the shoe last long in any condition. Additionally, the boot is elegant, trendy and lightweight, which means that you could use it for all manual jobs and later appear in the boots for a night out or a party in the neighbourhood! The break-in period for the boot to some people is quite hard and uncomfortable, but it’s worth the pain as, after that, the boot will serve you to your satisfaction.
- Excellent traction
- Lightweight and trendy
- Multipurpose boot for various uses
- Pure quality leather
- Break-in period is quite lengthy
- Carhartt Men’s CMF6366 6 Inch Composite Toe Boot
Picture this: having a work boot made of pure leather for a work boot- we can agree that it’s the dream of every serious boot user. The Carhartt Men’s CMF6366 6 Inch Composite Toe Boot is made of pure leather that is tough and durable. The quality of the leather is high end and resists all chemicals and oil that may come your way as you work out there. With a padded tongue that has a soft feeling, the comfort is one not worth comparing with any work boot.
The padding within the arch and ankle is designed to give your feet support and excellent stability. The sole offers perfect traction that will maneuver all situations, from snowy to muddy, rainy to icy with ease and flexibility. Another amazing feature is the shock absorption ability, which further protects your feet from strained experience.
- Strong and long-lasting
- Chemical, water and oil resistant
- Ideal for any environment
- Excellent traction
- A bit unbending when new
- Danner Men’s Bull Run 6” Work Boot
Having a boot with amazing aesthetic features and great performance can only be summed up in one product- The Danner Men’s Bull Run 6” Work Boot. With tough leather that is treated with grain oil, the boot is heavy duty and very durable. The footbed is cushioned with Ortholite that enhances comfort and support for your foot. Additionally, the 6” shaft running from the toe to the arch guarantees even more support to the foot.
Stitched and handcrafted all round, the shoe will not wear out anytime soon but will assure you of strength, stability and amazing service for many years. The boot’s ankle is relatively short to extra accord protection, but never the less is sufficient enough to protect you. The sole offers great traction and is slip-resistant.
- Complete grain leather for extra durability
- Anti-shock and slip-resistant
- Amazing stitching resisting wear and tear
- Very cozy to wear
- Quite heavy for some people
- KEEN Utility Men’s Pittsburgh Steel Toe Work Boot
KEEN Utility Men’s Pittsburgh Steel Toe Work Boot is loved and accepted by most workmen for the comfort and durability it gives its customers. Made from treated leather that resists stains and lasts long, this boot is a must-have for all work boots shoppers. Quality and safety are at the centre of KEEN Utility boot that has been crafted to make it the best work boot available in the market that you could trust.
The sports shoe design might confuse you on the ability of this boot- the versatility of this boot can only be answered by the performance when you work. The steel toe cap is strategically placed to keep your toes from any danger. If you are worried about the slippery floor, the traction of the boot is amazing and lets you move around freely. For easy breathability, a membrane designed to allow air in will ensure that your feet remain dry throughout. The footbed designed atomically guarantees your comfort and is an extra feature for a shoe that is dedicated to your safety, comfort and stability.
- Comfortable and flexible
- Guaranteed dry feet all-day
- Perfect traction
- Tanned leather that resists stains
- The sole tends to wear and tear with time
- Chippewa Men’s 9″ Waterproof Insulated Steel-Toe EH Logger Boot
After Chippewa being around for over a century, they have developed the Chippewa Men’s 9″ Waterproof Insulated Steel-Toe EH Logger Boot that represents versatility and quality. This has been achieved after the many years trying, designing and redesigning to finally come up with this boot.
A combination of the military-grade synthetic sole and first-class leather, the EH Logger Boot is one boot that is very efficient at work and sturdy. A combination of two medically tested and approved Ruby DriLex 2000 Chip-A-Tex that are incorporated in the shoe keeps feet dry, comfortable and cool even at extreme situations. This boots can be worn all day long without any form of discomfort.
- Comes with sophisticated waterproof technology
- Electric shock and waterproof
- Perfect traction for slippery surfaces
- Removable insoles for easy cleaning
- Very comfortable to enable you to perform at work
- Quite pricey though guaranteed quality
- Thorogood Men’s American Heritage 6″ Classic Plain Toe, Safety Toe Boot
Thorogood designed the Men’s American Heritage 6″ Classic Plain Toe to prove that a work boot doesn’t have to be ugly and plain- it can have great visual features and be safe, comfortable and tough! These boots are made of tough leather that is brown and has a cotton lining on the inside that further reinforce durability, toughness and breathability. The shoe is designed to work in all types of weather and will not disappoint.
For those of us exposed to slippery surfaces, the traction of the boot will not disappoint as the sole features a tough design for exactly such situations. A water-resistant welt makes working in wet and rainy weather very easy. For comfortability, inner soles are made from removable Poron cushions. And you don’t have to worry about breaking in the shoe as the laces have adequate allowance depending on the size of your foot.
- Durable leather
- Good traction on slippery surfaces
- Poron cushions are very comfortable
- Sole absorbs shocks making the boots ideal for tough conditions
- Waterproof from welt construction
- Quite high for some people
- Considered a bit heavy
Surprised? Getting a pair of the best work boots don’t have to be such a hard task! Accessing the right data is all you need, then utilizing it to select the best among all the options you may be having. Before we settled on these top picks, we considered comfort, versatility for different environments and quality materials used to make the work boots.
For summer season when the weather is intensely hot, we advise that you consider getting The Keen Utility Atlanta Cool Work Boot. The work boot not only prioritizes safety and comfort but also has extra features that will keep your feet cool even when you are stationed in very hot conditions. Count your feet saved from melting on hot weather when you purchase these boots.
Winter doesn’t have to be a nightmare if you plan to work on low temperatures- The Chippewa Men’s 9″ Waterproof Insulated Steel-Toe EH Logger Boot is all you need. Made with military-grade synthetic fabric and quality leather, these work boots, though quite heavy, are very effective and will serve you for many years during winter.
For a completely waterproof work boot that will not allow any air to go in, The Timberland PRO Men’s Titan 6″ Waterproof Safety-Toe Work Boot is a perfect choice. Nubuck leather combined with polyurethane midsole is airtight and will not allow any water get to your feet. A nylon diffusion plate is inbuilt to absorb all shock for those who work in solid surfaces
Frequently Asked Questions
Q: How do I select the comfiest Work Boots?
A: When considering the most comfortable boots, you need to consider certain features that include; waterproof, metatarsal guards, ankle support streak, shock absorption, slip resistance and welt construction. Go for a pair that is lightweight and flexible enough for easy movements. Additionally, select a boot that allows breathability and composite toe work boots.
Q: Which Company manufactures The Best Work Boots?
A: Many companies are specializing in making a variety of boots. Manufacturers are more inclined to making work and tactical boots, and they do this with precision, expertise and professionalism. However, people prefer Caterpillar, Timberland, Skechers, Ariats, Thorogood and Wolverine which can be said to be the bestsellers today.
Q: Why is the Leather the Most Preferred Material to Make Boots?
A: The durability of leather happens to be trusted by everyone, not only for work boots but for literally any good pair of shoes. If you are going to be engaged in long hours of work, then shop for a pair of pure leather boots. It’s important to know that pure leather boots are not the most advised during winter as the insulation is pretty poor.
Q: Which Boots should one buy for the cold-weather?
A: From our earlier discussion, one may inquire what other option is available given the fact that leather is of the book for cold weather. We could first advise that you consider a boot with proper insulation. Workboot makers rate their boots between 100-1000 Thinsulate grams. Depending on how cold your environment is, always go for the highest insulation to keep your feet dry and warm
Q: What is the Difference between Ordinary and Wedge Work Boots?
A: The major difference between these work boots is that Wedge boots are for professional floor men. Another salient distinction is that wedge boots are made to reduce the contact with harsh surfaces for instance concrete. Most wedge boots feature flat heel soles and are rubber made.
Q: What are the advantages of Steel-Toe Boots?
A: Work boots are specifically designed for environments where you could be involved with lifting and carrying stuff from one place to another. This could be quite dangerous as the load would fall on your toes, and we all know that would be damn painful. The solution is wearing steel-toe boots especially when you lifting heavy stuff to guarantee you protection for your feet.
Q: Are There Any Work Boots Made In The USA?
A: Yes. These include Chippewa, Keen, Bates, Justin, Danner, Hampton, Red Wing, Wolverine, Sheplers, Reebok, Thorogood, Rockport, Avenger and Florsheim. It is important to know that the ones made in the USA are quite pricey than other brands. In addition, other brands are made elsewhere and imported to the USA
Q: Are There Comfortable Work Boots Designed Specifically For Persons With Medical Conditions?
A: Absolutely, YES! If you suffer from conditions like Achilles Tendinitis, wide feet or flat feet and Plantar Fasciitis, there is something for you in the work boot market. Consider purchasing a work boot that offers support and is comfortable enough for your condition. Ensure that the work boot will accommodate your condition as selecting a wrong boot will mean disaster when walking, leave alone working.
Q: Are There Work Boots Designed For Different Work Environments?
A: No matter how much you spend on a high quality work boot, if it is not for the right environment, it only means one thing- problems for your feet. If you work on muddy, oily and wet surfaces, go for a boot that has superior traction as you can be assured of perfect balance and non-slip days. For summer and hot working conditions, look for a shoe that has dampness wicking technology with a breathable lining in addition to antimicrobial design to keep sweat and odor from your feet.
You need the right shoes for every environment. Wearing high-quality shoes for the wrong environment won’t cut it. Boots that provide superior traction are for people working around oily, muddy or wet surfaces because they create good balance to avoid slipping. For hot conditions, you should wear a shoe that has breathable lining, moisture-wicking technology and also antimicrobial feature that protects against odor and sweat. You will find plenty of options out there that provide this feature.
The terrain is key when selecting a work boot. The thread of the outsole and midsole quality will play an important role in your performance on various surfaces. Imagine standing all day on concrete floor in work boots without a cushioned insole or a thick outsole; we could all agree that it would be a catastrophic day.